RO-HD50,hot water disinfections RO system |
|
RO water product ≧ 1,500 LPH,at 25℃ |
|
For 25 beds dialysis machine ,max. for 30 beds applications |
|
Suitable for raw water quality TDS≦1,000 mg/L |
|
RO pre-filter | RO purification Unit + hot water disinfections tank |
RO-HD50 RO system specifications |
||
Items | Model |
specifications |
Raw water booster pumps | CM3-4x 2 | 2 Stainless steel pumps will alternative change operation |
Multi-medias filter: | SAFM-30 | FRP Tank-1665,medias 120Liters,auto-back wash control valve |
Water softener: | RF-30 | FRP Tank-1665,medias 120Liters,auto-regeneration control valve |
Carbon filter : | SAFC-30 | FRP Tank-1665,medias 120Liters,auto-back wash control valve |
5 μm cartridge filter | ST-F20 | 5μm,20" cartridge x 5 pieces,stainless steel housing |
RO purification Unit |
RO-HD50 |
1. RO membrane : TFC-4040 x 5 pieces 2. RO pump: CRI3-19,Stainless steel pump 3. Vessel : Stainless steel #304 x 5 pieces 4. RO water product ≧ 1,500 LPH,at 25℃ 5. Recover rate ≧50% |
Hot water disinfections device | PHD-200 |
1. Hot water tank made of stainless steel#304 2. Water heating up heater: 9 kW,220/380V 3. Temp. digital display meter with temp. control and pre-setting mode 4. Water temp. 85℃ for disinfections 5. Hot water tank with level s/w,ML、HL 6. Temp. on line monitor and control for disinfections 7. Circulation pump - stainless steel #304 |
RO-HD50,Hot water disinfections flow chart |
RO-HD50,RO system function descriptions
No. of dialyzer |
25~30 beds of dialysis machine |
1. RO water product | RO product ≧ 1,500 LPH,at 25℃ , recovery rate ≧ 50 % |
2. RO water quality |
RO membrane TFC- 4040 , high permeate , high rejection rate ≧ 99% ( single element ) RO water quality comply with AAMI standard |
3. Ro water supply | RO water directed supply to dialyzer with constant pressure and flow rate |
4. Piping material | RO system with SCH-80 PVC pipes connect,and pipe line to dialyzer with CPVC or PEX pipes |
5. Power control panel | PLC control panel or optional of POD for monitor alarm and remote control |
6. RO system disinfections |
Hot water disinfections mode for: 1. RO membrane disinfections mode 2. Pipe line disinfections mode |
7. 2-pass RO system |
Tap water TDS ≧ 1,000 mg / L, recommend to choose 2-pass RO system |
RO-HD50,2-pass Hot water disinfections flow chart |
|